|
|
|
|
| 
|
Turnbuckles
| |
| Eye & Eye (EE) |
|
Jaw & Jaw (JJ) |
|
- Hot dip gavlanized
- Forged body
- Heat treated
|
| Thread dia./Take Up (in.) |
Average overall with ends in closed position (in) |
Eye & Eye (EE) |
Jaw & Jaw (JJ) |
| 1/4 x 4 |
8 1/4 |
0.3 |
0.4 |
| 5 1/6 x 4/12 |
9 9/16 |
0.5 |
0.6 |
| 3/8 x 6 |
11 7/8 |
0.8 |
0.9 |
| 1/2 x 6 |
13 5/16 |
1.5 |
1.8 |
| 1/2 x 9 |
16 5/16 |
1.9 |
2.1 |
| 1/2 x 12 |
19 5/16 |
2.3 |
2.4 |
| 5/8 x 6 |
15 1/2 |
2.5 |
3.0 |
| 8/8 x 9 |
18 1/2 |
33 |
3.7 |
| 8/5 x 12 |
21 1/2 |
3.8 |
4.2 |
| 3/4 x 6 |
17 |
3.9 |
4.6 |
| 3/4 x 9 |
20 |
4.8 |
5.4 |
| 3/4 x 12 |
23 |
5.4 |
6.0 |
| 3/4 x 18 |
29 |
7.0 |
7.7 |
| 7/8 x 12 |
24 5/8 |
7.4 |
8.4 |
| 7/8 |
30 5/8 |
9.6 |
10.7 |
| 1 x 6 |
20 5/8 |
9.0 |
9.7 |
| 1 x 12 |
26 5/8 |
11.2 |
11.9 |
| 1 x 18 |
32 5/8 |
13.8 |
14.8 |
| 1 x 24 |
38 5/8 |
17.1 |
18.2 |
|
| Dia. A (in.) |
Working Load limit (lbs) (in) |
Dimensions (inches) |
| B |
C |
D |
E |
| 1/4 |
500 |
7/32 |
11/32 |
25/32 |
1 25/32 |
| 5/16 |
800 |
9/32 |
7/16 |
15/16 |
2 3/16 |
| 3/8 |
1,200 |
11/32 |
17/32 |
1 1/8 |
2 9/16 |
| 1/2 |
2,200 |
7/16 |
23/32 |
17/16 |
37 7/32 |
| 5/8 |
3,500 |
1/2 |
7/8 |
1 3/4 |
3 7/8 |
| 3/4 |
5,200 |
5/8 |
1 |
2 1/8 |
4 11/16 |
| 7/8 |
7,200 |
3/4 |
1 1/4 |
2 3/8 |
5 1/4 |
| 1 |
10,000 |
7/8 |
17/16 |
3 |
6/38 |
|
|
| Dia. A (in.) |
Working Load limit (lbs) (in) |
Dimensions (inches) |
| B |
C |
D |
E |
F |
G |
H |
| 1/4 |
500 |
5/8 |
1/4 |
13/32 |
9/32 |
1/2 |
15/8 |
5/8 |
| 5/16 |
800 |
7/8 |
1/4 |
15/32 |
9/32 |
1/2 |
2 |
11/16 |
| 3/8 |
1,200 |
7/8 |
5/16 |
1/2 |
5/16 |
9/32 |
2 3/16 |
13/16 |
| 1/2 |
2,200 |
1 1/16 |
3/8 |
5/8 |
13/32 |
3/4 |
2 3/4 |
1 |
| 5/8 |
3,500 |
1 5/16 |
1/2 |
3/4 |
1/2 |
1 1/32 |
3 1/2 |
15/16 |
| 3/4 |
5,200 |
1 1/2 |
5/8 |
15/16 |
9/16 |
1 9/32 |
4 1/8 |
1 7/8 |
| 1 |
10,000 |
2 1/16 |
7/8 |
1 3/16 |
25/32 |
1 21/32 |
5 17/32 |
2 1/8 |
|
Turnbuckles
- Do not exceed the working load limit.
- Inspect turnbuckles before use for bent components and worn threads.
Do not use if body or end fitting is bent more than 10° from axial center line.
Do not use if threads are visibly worn or feel loose.
- Apply turnbuckle in a straight in-line manner only. Do not allow anything
to contact the turnbuckle body or end attachment threaded shanks.
|
|
|
|
|