|
|
|
| 
|
Double Clevis - Chain Connecting Link
| |
|
- For permanent or temporary use, attaching chain hooks, rings, swivels, fittings, log chains, etc
- Heat treated pins
- Sizes for 1/4" through 5/8" chain
- Reusable - easy to install or remove
- Design ultimate strength equals 4 times working load limit, matching NACM specifications
- Approved CVSA repair link
- Not to be used for overhead lifting
|
|
Chain Size (in)
|
Working Load Limit (lbs)
|
Dimensions In Inches - see figure
|
| W |
D |
T |
L |
C |
H |
Pin |
| 1/4 or 5/16 |
4,700 |
0.43 |
1.09 |
0.34 |
0.50 |
1.70 |
2.61 |
3/8 |
| 3/8 |
6,600 |
0.50 |
1.28 |
0.40 |
0.5 |
2.00 |
3.06 |
7/16 |
| 7/16 or 1/2 |
11,300 |
0.65 |
1.62 |
0.54 |
0.69 |
2.59 |
3.90 |
9/16 |
| 5/8 |
15,800 |
0.75 |
1.84 |
0.63 |
0.75 |
2.81 |
4.31 |
11/16 |
 |
WARNING |
|
- Improper use or care of attachments can result in bodily injury or property damage.
- To avoid injury or damage, always observe the following when using chain attachments:
- Use only alloy attachments for overhead lifting.
- Do not exceed working load limit.
- Do not shock or impact load.
- Do not side load - center line of load must coincide with center line of attachment.
- Do not replace pin with other than original equipment parts.
- Inspect before use for wear, deformation, and pin engagement.
|
|
| 
|
|